,

Autel AE1475G225 G3″ Pulse Jet Valves


Product Details:
Place of Origin:China
Brand Name:Autel
Certification:ISO 9001,CE
Model Number:AE1475G225
Detailed Product Description
Model:AE1475G225Nut:Diecast Aluminum
Ferrule:304SSArmature:430FR SS
Diaphragm And Seals:PTFESpring:304SS
Screws:302SSOutlet Pipe:Schedule 40 Wrought Steel Zinc Passivated
High Light:AE1475G225, G3 Pulse Jet Valves, Integrated Pulse Jet Valves

Autel AE1475G225 High Performance Integrated valve G3″ Tank valve

Dust collector applications , in particular for reverse pulse jet filter cleaning including bag filters , ceramic filters , and sintered metal fibre filters.

General Description

In the high efficiency series we can include the range of flat surface valves. These valves, used for cleaning filter elements in air filtration systems, are specifically designed for flat surfaces like square header tanks and flanged tank. Like traditional model, with threaded and coupling connection, the activating can be:
Integrated the pilot is placed on the valve and the excitation (electric) is made by a coil.
Remote: the pilot is remote and the excitation is pneumatic. The connection between pilot and valve is made by a simple pneumatic tube.
All That is achieved from a deep studying of internal geometrical characteristics and from a technological research on diaphragm. This guarantees rapid opening-closing cycles and a working for over a million of shots.

Installation

1.  Autel Pulse Jet Valves AE1475G225 valves are installed through the tank, refer to the appropriate template listed above.

2.  To avoid any potential operational problems it is preferable that the valves are not mounted underneath the tank where condensation may collect. All o-rings should be coated with a silicone based lubricant or similar.

3.  Dresser nut seals where used are a pressure seal only, not a structural component. Do not rely on dresser seals to retain either the tanks or blowtubes. Tanks and blowtubes must be independently restrained.

4.  Tighten dresser nuts to 20Nm (15 ftlbs) max.

5.  Tighten pipe outlets to 20 Nm (15 ftlbs).

6.  Connect to Goyen pilot valve, if remotely actuated.

7. Ensure compressed air supply is dry and free from oil and dirt.

8. Check all cleaning system components are secure before applying pressure.

9. Apply moderate pressure and check for leaks.

10.Fully pressurise system.

11.Test fire and listen for proper actuation and crisp pulse noises.

 

Construction
BodyAluminum (Diecast)
WasherSS 304
ArmatureSS 430FR
Core and PlugnutStainless steel
Core SpringSS 304
Sealing & discNBR(nitrile/buna-n)
ScrewsSS302
DiaphragmPA-6(Standard), fluororubber
ConnectorPg9 IP65
Voltage230-150-24 V / 50-60 HZ AC
24 V DC
Working Temperature-20 to +85℃ Nitrile seals -29 to +232℃ fluororubber seals
Power Absorption17 VA AC / 17 W DC
Conn.Insulation classC-VDE 0110
Connector specificationDin 43650 – IS0 4400
Max Pressure8 Bar
Recommended on time range50-500ms
Recommended time between pulses1 minute or Less