Pulse solenoid valve is very important to the whole set of dust removal equipment, so you must be extra cautious when choosing the valve. Moreover, it is at a time when the country wants to strengthen its environmental governance, so the building materials industry like cement plants must choose high-quality cement plant solenoid valves. To choose high-quality professional valves such as solenoid valves in cement plants, it is not enough to just listen to the introduction of a factory customer service staff. You must master some basic knowledge about valve testing and perform some necessary tests yourself.
To test the performance of the pulse solenoid valve, attention should be paid to the aspects of air pressure, voltage, anti-vibration, and diaphragm life. Among them, the diaphragm life is the most important. The diaphragm is the core of the valve. When testing the quality of the diaphragm, it is best not to rely solely on the number of continuous operations of the valve as the standard. If possible, pay attention to the anti-corrosion and anti-aging ability of the diaphragm. However, it takes a long time to Detection. For the voltage and air pressure test, the corresponding nominal voltage electric signal and clean air can be connected to the air inlet respectively to check whether the pulse solenoid valve is operating normally.
Having mastered these basic knowledge, I believe that our customers will be at ease when buying pulse solenoid valves in the future. Selection is only a prerequisite, and there are many technologies in it during installation.
First of all, we should start with the installation of the electromagnetic pulse valve. This is the first step. If there are problems with the installation, how can the quality of the follow-up work be guaranteed? When installing a pulse solenoid valve, you must first look at the parameters on its nameplate, do not exceed the standard, this is the most basic, because the maximum workload of your pulse solenoid valve is these on the nameplate. In addition to the nameplate, pay attention to the installation angle of the valve, the flow direction of the medium in the valve, and the impurity content of the pipe connecting the valve.
Secondly, try to ensure that the intake air is clean, otherwise it will cause the pipeline to be blocked, the pressure will be abnormal, the valve port will blow out and exhaust, and it may also cause dirt to build up on the valve core and contaminate the valve core.
When selecting a pulse solenoid valve, first consider whether the valve is suitable for the working environment, that is, whether the temperature, viscosity, and pressure difference of the fluid in the pipeline meet the valve’s specifications. At present, the counterpart valves (solenoid valves in cement plants, etc.) that our factory is working on generally require relatively high fluid cleanliness. Therefore, if conditions permit, a filter should be installed in front of the valve to ensure fluid cleanliness.
While ensuring the working efficiency of the solenoid valve, its safety cannot be ignored, which is mainly determined by the working environment. The general pulse solenoid valve has no waterproof function. If necessary, the waterproof valve should be customized from the relevant factory. Also pay attention to the pipeline pressure at all times. The pulse solenoid valve is also very demanding for the pressure of the pipeline. Remember that the highest calibrated pressure must be higher than the pressure of the pipeline.
At present, our factory is vigorously developing the field of matching valves. If you need a cement plant solenoid valve, you can contact us and we will serve you wholeheartedly. In order to create a tailor-made wedding dress for you, Haixin is deeply researching counterpart valves and producing professional pulse solenoid valves such as solenoid valves for cement plants. This is a measure that is specifically aimed at the current situation in China.
More details, please visit: https://www.uflow-pneumatic.com/blog/